The Secret Bandwidth of Addressable Advertising
by Leslie Ellis -- Multichannel News, 8/10/2008 8:00:00 PM
Last summer, while talking with a small gathering of muckety-mucks from a cable program network about how cable operators use bandwidth, I was asked what I knew about the “secret bandwidth.”
Secret bandwidth. News to me.
I asked for particulars. Turns out that this executive had learned from a cable operator contact that in addition to the digital shelf-space dedicated to standard and high-definition linear TV, a special reserve also existed for advanced advertising.
I resisted the urge to tell the guy that he’d been tricked into some kind of digital snipe hunt.
A year passed. Then, last week, a muckety-muck of the advanced advertising persuasion took a pause from his huevos rancheros to ruminate over the bandwidth implications of addressable advertising, in high definition.
In order to send a 30-second spot that is, for whatever reason, more targeted than what’s already embedded in the linear video stream for that show, he said, operators will probably need to reserve some portion of their existing bandwidth.
Tactically, it goes like this: A typical, 6-Megahertz digital-cable channel carries 10 to 12 linear video streams, in standard definition. To do addressable advertising, the substitute ads need some carriage room, too. Like three or four of those 10 to 12 streams.
Aha! The secret bandwidth.
Predictably, different addressable advertising vendors do this differently. Some borrow streams from within a mux, as described. Others ask for dedicated capacity — one to two 6 MHz channels, to carry the addressable ads.
(Proponents of the first method say that proponents of the second method introduce latency issues, because the set-top box has to physically retune to another multiplex, in order to grab and display the ads from the secondary or tertiary channel.)
In HD, though, the matter gets more pronounced, because only two to three HD streams fit into that same 6 MHz digital cable channel — so where do the addressable ads go?
Three options, each with an increasing level of complexity. One: Dedicate additional digital channels to the needs of addressable ads. Two: Go faster on the move toward a unicast architecture — where each household gets its own video stream, and its own ads. Three: Find a way to use advanced compression — to mix MPEG-2 and MPEG-4 traffic in the same channel.
To those of you who, like me, were stumped chumps about the secret bandwidth — there it is. To those who already knew — my apologies for assuming a digital snipe.
Stumped by gibberish? Visit Leslie Ellis at www.translation-please.com.
CableLabs Hosts Advanced Ads Interop Session
06/08/2009Cox Taps Navic for Addressable Ads
11/29/2005Burke Warns: TV Shift Is Coming
10/31/2009
