ATLANTA — As cable operators around the world enter the finishing stages of DOCSIS 3.1 deployment, it’s still unclear as to how much current demand there is for services at 940 Mbps downstream, the technology’s current speed threshold.

6_Arris_chart

But Arris is now challenging the industry to see downstream speeds of 1 Gigabit per second as just a signpost that’s coming up fast. With the Internet of Things putting more connected devices in the home, and applications like 4K streaming and virtual reality emerging, the vendor has said cable operators are going to need to bring speeds of 20 Gigabits per second into the home in the next 10 to 15 years.

While compounded annual growth rates (CAGR) for downstream internet traffic have stabilized a little of late, “upstream is actually accelerating, 25-30%, which is quite a bit higher than the 20% it used to be,” Tom Cloonan, chief technical officer of Arris’ Network Solutions unit, said. The Suwanee, Ga.-based vendor is now focusing on technologies that improve upstream capacity and latency, he noted.

In doing so, Arris is walking a bit of a marketing tightrope, as it tries to sell a more immediate network upgrade, Full Duplex DOCSIS (FDX), and a separate, theoretical one that is further out, Extended Spectrum DOCSIS.

Upstream Traffic Jam

As subscribers’ bandwidth demands grow and equipment capacities increase, MSOs will need to expand their upstream spectrum, and FDX provides a somewhat immediate opportunity to do just that, Cloonan said.

FDX enables DOCSIS 3.1 hybrid fiber-coax (HFC) networks to support shared 10 Gbps transmission capabilities both upstream and downstream. The current technology, DOCSIS 3.1, will support 10 Gbps downstream and just 1 Gbps upstream, once all of the standard’s features are finally actualized.

With CableLabs completing the specifications for FDX a year ago, Cloonan and his team used last week’s SCTE/ISBE Cable-Tec Expo in Atlanta to show off network solutions based on the second generation E6000 Converged Cable Access Platform, with an eye for FDX upgrades occurring in the next two years.

Indeed, at the booths of multiple technology vendors, Full Duplex was in the here and now at Expo. Operators such as Comcast, for instance, were looking to swap in FDX-capable nodes as they transition to Distributed Access Architectures (DAA). Arris has already been in the market touting the FDX upgrade potential of its DOCSIS 3.1 network solutions, such as one recently deployed by Australia’s NBN earlier this year.

To make FDX a reality, Cloonan explained, operators will need to be able to move quickly to a node+0 environment and be willing to upgrade their Cable Modem Termination Systems (CMTSs), nodes and CPE.

Of course, that’s asking a lot for some cable companies.

Though it’s further out and currently in the research and development phase, Cloonan said Extended Spectrum DOCSIS may be better suited for operators that want assurances that their future high-capacity networks will work in existing node+X environments that may not support FDX operation, which requires node+0, where amplifiers are not used.

“There are a lot of operators who have no intention of getting to a node+0 environment in the next 10 years,” Cloonan said. “It’s going to take a while to run fiber deep enough to get to node+0.”

Capable of working in node+6 configurations and delivering theoretical symmetrical speeds as high as 60 Gbps, Extended Spectrum DOCSIS (aka “DOCSIS 4.0”) is being championed by operators including Cox Communications.

With Extended Spectrum DOCSIS, operators would use more — a lot more — than the 1.2 Gigahertz of plant spectrum they currently exploit for DOCSIS 3.1. In fact, they’d use more than the 1.8 GHz leveraged by FDX. Extended Spectrum’s visionaries see as much as 3 GHz, or even 6 GHz, being used.

It was Cloonan who first pitched the Extended Spectrum idea two years ago, with technologists proposing the use of 6 GHz of spectrum and Fiber Deep to deliver symmetrical speeds as high as 50 Gbps.

Earlier this year, Jeff Finkelstein, executive director of advanced technology for Cox Communications, told Light Reading that he had a team of Georgia Tech graduate students perform calculations suggesting the concept could actually work.

“A lot more work has to be put into it to prove it will work,” added Cloonan, who envisions a goto- market for Extended Spectrum sometime in the mid-2020s. “It’s not going to be put into the field next week.”

Of course, all of this work on advanced DOCSIS technologies is unfurling as Arris continues to support the current DOCSIS 3.1 standard.

“From Arris’ point of view, we’re still developing 3.1 features,” Cloonan said. “The spec is several thousand pages long. Certainly, not every feature was turned on on day one. We’re still rolling features in. It’s still a very active program.”

Related